Engine oil Liqui Moly Synthoil High Tech

Is a synthetic product with low viscosity properties. LIQUI Moly Synthoil High Tech motor oils are suitable for year-round use in passenger cars. Designed to meet the requirements of modern engines, it is recommended for turbocharged engines.

Liqui Moly Synthoil High Tech oil Line

Range of oils Liqui Moly Synthoil High Tech

The considered series of LIQUI Moli includes several representatives with different viscosity classes, but the varieties 5W: 30, 40 and 50 will be considered in detail.

The composition is developed and regulated exclusively by the manufacturer, the addition of any third-party, inconsistent components is prohibited.

Properties, tolerances, specifications and physico-chemical data (example 5W40)

The distinctive features of high-quality lubricating fluid from Liqui Moly include:

  1. Increased engine life.
  2. Can be mixed with standard oils.
  3. oil Flow to engine parts at low temperatures.
  4. Maintain stable properties at both low and high temperature values.
  5. aging Resistance.
  6. engine Cleaning.
  7. Good motor start-up.
  8. reduction Of fuel consumption and harmful emissions into the atmosphere.
  9. Low fumes and evaporation.

It has APISM/CF, ACEAA3-04/B4-04 certificates. Is approved by Mercedes Benz, BMW, VW, Porsche.

Technical parameters:

  • Viscosity index at 100 S – 14.1 mm q / s
  • Density (at t 15 S) – 0.85 g/cm cu.
  • Viscosity index at 40 Celsius – 86 mm sq/s.
  • Solidification at t -45°.
  • Viscosity index – 170.
  • Flash in open crucible – 222° C.
  • HTHS – more than 3.5 MPa*p.
  • Alkali – 9.6 mg KOH/g
  • ash Content – 1.2 g/100 g

Most striking is the freezing point, which is 45 degrees below zero, which is an excellent indicator even for a harsh winter.

The manufacturer recommends this series of engine oils for diesel and gasoline atmospheric engines, turbocharged engines, with and without particulate filtration systems. It can be used for ice, converted to work on gas. Supplied in containers 1, 4, 5, 20, 60, 205 liters.

LIQUI Moly Synthoil High Tech motor oils 5W40

Overview of modifications


Universal enough, suitable more for a moderate, quiet ride, do not use it for loaded engines.

It is possible to recommend Liqui Moly 5W30 for Russian and foreign cars, it provides the possibility of replacement in the conditions of a long interval of work, if it is calculated by the manufacturer of the car.


Perhaps more popular. Car oils with an index of 40 in General are the most popular among consumers. This copy shows a higher resistance to high temperatures and loads, in connection with which it can be advised for turbocharged ice used at sufficiently high loads.


Not a particularly popular option, but it is best suited for fans to drive and start the tachometer arrow in the red zone. But with a quiet ride engine oil 5W50 will not work well enough and will not be able to realize all its properties, which will reduce the quality of lubrication of working parts.

Generalized car owner reviews

Summing up the impressions of drivers about this car oil, we can distinguish a softer operation of the power unit, which remains until the replacement of the oil composition. This quality is achieved through the competent selection of the necessary components – whatever you say, and the Germans know a lot about it.

Someone notes the noisy operation of the engine on the previous oil, before switching to Liqui Moly, then the noise remained the first few starts and on it, but then completely disappeared. There is an unexpectedly easy start at temperatures around -30.

Liqui Moly Synthoil High Tech 5w30

package Overview

Sometimes the buyer may be lucky enough to buy a canister with a small gift in the form of an analogue of WD-40 liquid for unscrewing rusted threaded connections and other similar purposes.

The cover is equipped with a special built-in funnel for easy filling, an additional bonus of such a system, the absence of dirt.

On the bottom is the date of production, on the side at the bottom of the serial number. 4 — liter canister is equipped with two convenient handles at the top and side. The labels are applied to the pads, which are slightly melted into the container. The back label has a brief description of the engine oil and some of its characteristics.

Алексей Назаров/ автор статьи

Руководитель сети СТО с огромным стажем работы.

Понравилась статья? Поделиться с друзьями:
Добавить комментарий

шестнадцать + 15 =

Нажимая на кнопку "Отправить комментарий", я даю согласие на обработку персональных данных и принимаю политику конфиденциальности.